10-300 Tpd Converting Waste Engine Oil to Diesel

10-300 Tpd Converting Waste Engine Oil to Diesel

ten-three hundred TPD changing waste motor oil to diesel

1.Squander engine oil waste automobile motor oil refinery to base oil ?
The main technological innovation of waste oil regeneration in abroad is Kleen,Meinken,IFP,KTI,Snamprogetti,DOH,DCH,BERC and Recyclon.and so on.New procedures that have been applied abroad contain ultrafiltration, centrifugal separation, molecular distillation, flocculation, solvent refining, and so forth.In the late eighties, two regeneration procedures were produced in China.One particular is distillation-extraction-clay procedure, which utilizes ethanol as solvent for extraction the other is high temperature clay procedure, which brings together distillation and clay treatment in the same method.Recent skinny movie evaporator – furfural refining-clay procedure can extract a lot more foundation oil fractions than traditional vacuum distillation, furfural has greater extraction influence than ethanol, and the produce of foundation oil is increased.
In accordance to the deterioration system and diploma of lubricating oil, the regeneration technological innovation of squander motor oil can be divided into re-purification method, fantastic refining method and re-refining process.

2.Technologies of our company

 1) Method stream description

The approach of squander oil reduction and regeneration base oil is launched as follows: Our company specializes in the production of squander oil regeneration equipment and process research and growth for far more than ten many years, and consistently explores and enhances the technology. Combining with the rewards and disadvantages of the existing tools process, we emphasis on the components in the procedure of squander oil processing equipment, which are straightforward to coke at higher temperature, have large working value and have a lot of likely protection dangers. The difficulty of substantial overhaul rate and high technical issues has been talked about and analyzed, and a good deal of manpower and content assets have been invested. By way of repeated tests and ongoing improvement, the issue of straightforward coking of components at higher temperature has been effectively solved.

 2)Undertaking overview(Examples for reference)
1)Venture Title: eighteen,000T/a squander lubricant recycling venture
2) Nature of the industry: waste methods and recycling of waste components
three) Overall investment decision: twenty million yuan
4) Land location: fourteen,000 square meters, building area 5,120 sq. meters
five) Greening location: The whole plant has a eco-friendly area of 1820 sq. meters, and the greening rate is 13%
six) Quantity of employees: 30 employees members
seven) Hrs of operate: 300 days for the complete year, 24 hours for the day, and 7,two hundred hours for the complete calendar year

three.Positive aspects:
one.Lower investment, low wastage and higher generate.89-96% higher recovery price
two.Can be employed as the base oil of worldwide expectations, SN150.SN250.SN350
three.Easy to operate
 

four.Major Equipment introduction

1)Distillation tower introduction

Fractionating tower with structured packing

The tower is divided into:

a.In the leading of the tower, the product is the very first-line oil.

b.2nd-line return and recovery section, the product is 2nd-line oil

c.Third-line return and recovery area, the merchandise is 3rd-line oil
2)Tank and warehouse storage

5.The top quality of oil from our consumer:

 

six.Main product testing index

(Third-line oil) finished product quality inspection standard HVI250
1 Test items Indicators Reference standard
two Flash point ≥220ºC

GB/T3536-1983   Flash point and flash point determination of 

petroleum products (Cleveland open cup method)

3 Pour point ≤-12ºC GB/T3535-1983  Petroleum products pour point measurement method
4 Chroma two GB/T6540-1986  Oil product color measurement method
5

Kinematic viscosity

 (40 degrees)

42-55mm²/s

GB/T265-1988  Kinematic viscosity measurement and dynamic 

viscosity measurement of petroleum products 

six

Kinematic viscosity

 (100 degrees)

Report

GB/T265-1988  Kinematic viscosity measurement and dynamic 

viscosity measurement of petroleum products 

seven Viscosity index ≥100  GB/T1995-1998   Oil Products Viscosity Index Calculation Method
eight Acid value ≤0.03(mgkoh/g)  GB/T264-1983  Oil product acid value measurement method
9

Demulsification 

(54 degrees)

≤10min GB/T7305-2003  Separation of oil and synthetic liquids
10 Water content Trace GB/T260-1997  Oil Products Water Content Measurement Method

7.Packing and Offering

Utilized Motor Oil/Pyrolysis Oil Recycling Plant to Foundation oil .

Packing Particulars : Wood scenario package of common export.

Shipping Specifics : fifteen-thirty times following obtained the deposit.

We will give the most dependable, safest method of transportation, in order to save delivery cost.

We will provide the most dependable, most secure mode of transportation, in buy to save transport price.

eight.Successfull Installation

FAQ

1.what approach are you using ? 
The method of scraping film evaporator 
two.what is the output parameters of the foundation oil ? 
we can get global common foundation oil ,like SN250. SN150.SN350 . 
3.did you at any time build some vegetation in china ? can we see it ? 
of course ,we have built some squander oil refining to base oil plant ,
you can check out the plant if you arrive to china . we truly welcome you to come to china to check out our plant .
four. do you have skilled engineer to assistance oversea provider ?
of course , we have skilled engineer to support oversea provider .
5.can you supply oversea installation ?
sure ,we can source oversea set up assistance

10-300 Tpd Converting Waste Engine Oil to Diesel