Curtis PMC Permanent Magnetic Controller 1228-2901 24V for Forklift Pallet Sightseeing Car

Curtis PMC Permanent Magnetic Controller 1228-2901 24V for Forklift Pallet Sightseeing Car

Curtis PMC long term magnetic controller 1228-2901 24V for forklift pallet sightseeing car



  • PWM functioning frequency: 15 kHz
  • CZPTal isolation to heatsink (min.): five hundred VAC
  • Dielectric resistance: >1 MΩ (DC examination)
  • Heatsink overtemperature: linear cutback commences at 92°C comprehensive cutoff at 134°C
  • Heatsink undertemperature: fifty% armature current at -25°
  • Undervoltage cutoff: 14 V
  • Overvoltage cutoff: 34 V

The CURTIS 1228 MultiMode™ controller is a permanent magnet motor pace controller made for use in mobility aid scooters and other tiny electric powered cars, this sort of as sweeper/scrubbers.


       The 1228-2901 offers sleek, silent, price efficient control of motor pace and torque. A 4 quadrant, total bridge electrical power output phase provides for sound condition motor reversing and full braking energy CZPT added relays or contactors.
       The 1228-2901 controller is completely programmable, by way of the CURTIS Model 1313-4401 Handheld Programmer or 1314 Laptop Programming Station. This means the controllers can be tailor-made to the wants of particular applications. In addition to configuration flexibility, use of the programmer delivers diagnostic and check functionality.

Essential Functions:

  • CURTIS Model: 1228-2901
  • Norminal Battery Voltage (Volts): 24V
  • fifteen Next Existing Ranking (amps): one hundred ten
  • 1 Minute Current Rating (amps): one hundred ten
  • 1 Hour Recent Rating (amps): forty
  • Peak Enhance Present (amps): ninety
  • Max Improve Present Period: 10 Next
  • Minimal motor resistance: a hundred thirty mΩ
  • B+, B- logic pin recent (max.): nine A (pins 1, two and 10, eleven on 18-pin connector)
  • KSI enter existing (standard): fifty mA CZPT programmer a hundred and fifty mA with programmer
  • KSI input recent (peak): 1.5 A
  • Logic enter current (common): one mA at 24 V
  • Horn output existing (max.): 15 mA
  • BDI output voltage and current (max.): -five V, two mA
  • LED output current (max.): 15 mA
  • Electromagnetic brake coil resistance (min.): 32-200 Ω
  • Throttle Variety: By default, the Throttle Variety of controller 1228-2901 is set as Kind “”. The controller 1228-2901 can be programmed to accept solitary-ended, wigwag, or inverted wigwag indicators from a 5kΩ, three-wire pot or from a 5V throttle. The throttle enter sign sort possibilities (Varieties “” via “5” in the Throttle Kind programming menu) are shown as under:
    • = wigwag pot or voltage throttle
    • 1 = inverted wigwag pot or voltage throttle
    • two = solitary-finished pot highest pace = 5kΩ
    • three = inverted solitary-finished pot optimum velocity =
    • 4 = one-finished voltage throttle maximum speed = 5V
    • 5 = inverted one-finished voltage throttle maximum pace =
  • Dimensions: W91xL156xH43 mm
  • Net Bodyweight: .6 kg
  • Regulatory compliance: Made to ANSI RESNA WC 14/21, ISO 7176-14, ISO 7176-21, and EN 12184. Documentation CZPT to help 510K Food and drug administration filings.
  • Functioning ambient temperature selection: -25°C to 50°C
  • Storage ambient temperature assortment: -40°C to 70°C
  • Deal environmental ranking: IP40

Attributes Incorporate:

  • Total bridge electricity MOSFET design, delivering
    • infinitely variable CZPT, reverse, drive, and brake control
    • silent large frequency procedure
    • higher efficiency
  • Comprehensive diagnostics by means of the CURTIS programmer and a standing LED
  • Complete compliance with all applicable global specifications
  • Available for one-finished or wigwag 5kΩ potentiometer throttles and 5V throttles (equally common full stroke and limited variety)
  • MultiMode™ enter selects in between two different operating modes, therefore making it possible for optimization of motor vehicle attributes for different driving conditions (for illustration, indoor/outside)
  • Velocity limit input offers linear variable pace limiting when an exterior pace restrict pot is utilised
  • Recent limiting in the two driving and regenerative braking modes
  • Load compensation stabilizes speed on ramps and above obstacles
  • Pace scaler gets rid of versions in optimum speed that would or else end result from versions in battery cost amounts
  • Higher pedal disable (HPD) purpose with lockout screens standing of the throttle during switch-on and prevents procedure till the throttle has been returned to neutral
  • Key-off deceleration perform gives a managed deceleration if the keyswitch is turned off whilst driving
  • “E Stop” supplies a quicker deceleration for crisis stops
  • Seat raise function simplifies the wiring required to put into action seat carry in DME scooter apps
  • Thorough fault detection screens major contactor, output phase, throttle need vs. output, and so on., and disables the push features if any circumstances are outside the house specified boundaries
  • ISO 7176 compliant throttle fault detection circuitry inhibits driving if throttle pot signal goes out of selection for any purpose
  • Lacking/shorted brake detection forces neutral in the occasion of an open or shorted brake circuit
  • Anti-rollback/anti-roll-CZPT perform sets brake delay in accordance to pace and direction for enhanced braking response and minimized rollback on hills, etc.
  • Reverse beeper option can be employed to drive a reduced recent dc horn when motor vehicle is in reverse
  • “Push” enter electrically releases brake for key-on pushing (demands that the car be stopped first)
  • “Push-Also-Rapidly” attribute guards in opposition to unpowered vehicle runaway by powering up and regulating motor voltage to limit automobile speed
  • Inhibit input disables the controller and puts the car in a safe condition in the course of charging, etc.
  • Electricity saver deactivates the principal relay following twenty five seconds of nonoperation and deactivates the entire controller soon after the programmed rest hold off has elapsed
  • BDI output can be employed to give info to a voltmeter the BDI output can be “stuffed” (optional) in buy to show the battery point out of cost in the course of battery charging even although the keyswitch is turned off
  • Undervoltage cutback operate protects towards operation at low battery voltage
  • Overvoltage safety shorts the motor and disables driving in the function of abnormal battery voltage
  • Thermally secured
  • Reverse polarity protected (battery input)
  • Easily programmable through the CURTIS Model 1313-4401 Handheld Programmer or 1314 Laptop Programming Station.


Package & Shipping 

Deal:Generally we use the regular exporting packaging. We also can according to clients’ request .


 Shipping : 

1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier  we are co-operating at current.

2. By Air: Delivery from the ZheJiang  airport to customers’ destination city air port.

three. By Sea: Delivery from the ZheJiang  sea port .



Q1. Can I have a sample get?

A: Yes, we welcome sample purchase to check and verify good quality.

Q2. What about the guide time?

A: Samples arrived usually require 3-5 days.

Q3. Do you have any MOQ (minimum get quality)limit?

A: Low MOQ, 1pc for sample examining is CZPT.

Q4. How do you ship the merchandise and how lengthy does it take to arrive?

A: We often ship by DHL, UPS, FedEx or TNT. It typically takes three-five times to arrive. Airline and sea transport is also optional.

Q5. How to proceed an order?

A: Initially, enable us know your requirements or application. Besides, We quote in accordance to your requirements or our suggestions. Thirdly, consumers confirms the samples and spots deposit for official get. Lastly, We prepare the production.

Q6. Is it appropriate to print my emblem on the solution?

A: Of course. Remember to notify us formally just before our merchandise and affirm the design and style to start with dependent on our sample.

Q7: Do you provide assure for the merchandise?

A: Yes, we supply one-year warranty for our items.

Q8: How to offer with the flaw?

A: Our products are made in rigorous top quality handle system and the % of move is usually taken care of in excess of ninety nine.8%.

About us

HangCZPT Huanxin Technology CZPT Co., Ltd. Has been devoting ourselves to creating and production and other because 2004. We are located in HangCZPT, ZheJiang Province, with convenient transportation accessibility. We make use of more than one hundred and one – 200 Individuals workers members. We have reached wonderful advancement since our business was started in 2004. We abide by the motto of Firstclass quality, Reasonable price tag, Very best provider and Specialist item help. 

Main Goods:

Our organization:

Partial client analysis

If any require you should get in touch with me


Curtis PMC Permanent Magnetic Controller 1228-2901 24V for Forklift Pallet Sightseeing Car