Rubber Dispersion Kneader Machine Closed Type Banbury Mixer

Rubber Dispersion Kneader Machine Closed Type Banbury Mixer

Rubber Dispersion Kneader Device Shut Kind Banbury Mixer 

one. Specs:
 
one.Mixing Chamber & Rotors 
two.Side Board and Pressure Lid 
3.Mechanical Seals and Chamber Tilting 
four.PLC handle program.
 
2. Rubber kneader every component introduction: 
 
Mixing chamber:
 
It is made up of a “W” shape physique and two side boards manufactured of high top quality metal plates by means of extrusion forming and welding, which are jacked to just take the stream of cooling water or steam. It is plated with challenging chrome on its inner partitions.
 
Thermal Resistance:
 
There is a plug-in thermal resistance in middle part of the base of the chamber to be connected to electrical technique to inspect and display the temperate.
 
Rotor:
 
It is made to the hollow blades of Banbury kind. The hollows are related with axial hole of rotor shaft utilized as cooling or heating passage. The best edges of blades and the stop faces of ~ rotor shaft are area welded with cobalt-foundation hard alloy and grinding, then plating with tough chrome and sprucing.
 
Cooling/heating program:
 
A typical piping method is adopted for both cooling or heating material in mixing operation. Through the technique cooling water or steam is fed in three ways to the cavities of the rotors blades, the mixing chamber and the top ram.
 
Tilting mechanism:
 
It is composed of a rotor with brake, cycloidal gear reducer, TP kind worm and worm equipment, etc.. It is able to actuate the mixing chamber tilting by 140° close to the front rotors.
 
Dust sealing unit:
 
At the joint in between the leading of the mixing chamber and the cantilevered arm of the equipment body, the dust sealing assemblies with curved slotted partings are employed acquiring an exceptional and trustworthy sealing function.
The conclude encounter of the rotor is sealed by finish make contact with sealing with nor oil-lubrication and is seals effectively and is dress in-resistant and durable.
 
Principal driving system:
 
The component is manufactured up with main motor, reducer, connecting gears. It realizes odd-velocity rotation of the rotors with working experience one other.
 
Pneumatic manage system:
 
Pneumatic control method is controlled by XG get. The bi-directional air cylinder helps make the ram up or down. In circumstance the more than load occurs in the mixing chamber, the top ram can be lifted immediately or manually if necessary, so as to defend motor from overload.
 
CZPT management program:
 
CZPTed PLC unit and electric powered handle factors which are all imported merchandise or imported technological innovation goods are adopted in the electrical handle technique as to increase manage reliability.
 
three. parameters of rubber kneader 
 

Parameters                          Specs
X(S)N-35/30 X(S)N-55/thirty X(S)N-75/30 X(S)N-one hundred ten
Net chamber volume 75 125 a hundred seventy five 250
Working volume  35 fifty five seventy five one hundred ten
Front/back rotor friction ratio  1.22 1:one.22 one:one.22 1.22
Power  55 75 a hundred and ten one hundred sixty
Main motor rotation speed 985 985 985 985
Turn angle a hundred and forty one hundred forty one hundred forty 140
Size  3200*1900*2950 3750*1950*3050 3760*2143*30500 3930*3000*3660
Fat(kg) 6500 7800 10000 16000

four. Equipment photos: 

5. Our certifications:


 

Rubber Dispersion Kneader Machine Closed Type Banbury Mixer