Tdmk Series High-Voltage Mine Ball Mill Synchronous Motor

Tdmk Series High-Voltage Mine Ball Mill Synchronous Motor

TDMK sequence large-voltage mine ball mill synchronous motor is suitable for operating in indoor setting where the altitude is not much more than 1000m, the temperature of the cooling medium is not far more than 40 levels, much less dust, no corrosive gas this sort of as steam, acid or alkali. This collection of motors is rated at 6000V and can also be equipped with 3000V and 10000V in accordance to user specifications. The allowable voltage has a deviation assortment of +five%, the rated electricity supply frequency is fifty Hz, and the rated power issue is .9 (major).
The TDMK series mining synchronous motor has a cylindrical shaft extension end, and its rotation course must be rotated in the route specified by the sign. The course of rotation is usually counterclockwise from the conclude of the collector ring, and can also be made clockwise in accordance to specifications. When the motor and the mill are coupled by a coupling, the motor shaft can not be extended to face up to exterior radial or axial forces.
The mining synchronous motor excitation method uses a thyristor excitation gadget.
The mine substantial voltage synchronous motor enables full voltage to be started out immediately. If the user’s power grid does not allow the full voltage to commence right, the phase-down start off can also be employed. At this time, the commencing present of the motor decreases in proportion to the terminal voltage, and the beginning torque decreases in proportion to the square of the terminal voltage.
TDMK series 400KW synchronous motor stator guide-out line: There are six outlet heads, particularly U1, V1, W1, U2, V2, W2, which are led out on the decrease output clamp of the base by high-voltage rubber cable, or can be manufactured as necessary. Box wiring.
This sequence of synchronous motor seat bearings: oil ring bearings or composite bearings, seat bearings are put in amongst the bottom plate with insulation pads to avoid the era of shaft current.
The TDMK collection motors are primarily suited for large AC a few-section synchronous motors utilised in transmission mine mills. The major transmission lattice ball mill, rod mill, coal mill mining tools. The primary motor is coupled with the pinion via the air clutch to realize a one-stage reduction transmission to drive the rotation of the rotary element.

Motor name: Mine substantial-voltage a few-section synchronous motor
Energy assortment: 300KW-5000KW
Pace range: one hundred fifty–500 r/min
Rated voltage: 6000V/10000V/13800V (can also be made into other grade voltages)
Rated frequency: 50HZ/60HZ
Electrical power element: .nine
Insulation class: B
Temperature increase stage: B
Maximum torque a number of: two.
Protection stage: IP00/IP21/IP23
Set up strategy: IM7311
Doing work technique: S1
Excitation mode: static thyristor, other excitation strategies can also be used
Link: Y
Cooling technique: IC01. Other kinds of motors can also be made in accordance to person demands, this kind of as duct air flow and air and air cooling.
Mine synchronous motor use elevation: no much more than 1000m, the motor can be installed in accordance to the requirements of temperature measurement, heater, effect defense and other gadgets. The allowable voltage has a deviation selection of ±5%, since the electrical power element is in advance of the curve, which has a specified payment impact on the electrical power grid. This kind of motor is suited for use in environments the place the ambient air temperature does not exceed forty ° C and there is no serious dust, the minimal ambient air temperature is -fifteen ° C, and there is no corrosive and explosive gas in the air (which can also be manufactured into a damp heat or high-altitude motor).

The mine a few-period synchronous motor has large starting torque and substantial out-of-phase torque. The motor has an advanced electrical power aspect (which improves grid power factor), high performance, high stability and large overload ability, and has the performance that the pace does not adjust with load.

one. The outer packaging of the merchandise are all standard export-oriented wooden plywood packaging.
2, the solution packaging is protected by moisture, drinking water plastic soft packaging
3. For merchandise with special transportation demands (such as temperature, fragile, variability, and simple to get soaked), the packaging defense steps will be strengthened, and the concentrate on mark will be printed on the bundle.
4. There are clear symptoms and symbols on the packing box that should be compensated focus to for the duration of transportation and storage (such as place, humidity, rain, shockproof, lifting place, and so forth.).

There are several sorts of motor products made and bought by our firm. The main merchandise are high- and reduced-voltage three-stage asynchronous motors. The motor composition sorts consist of squirrel-cage kind and winding sort. Between them, substantial-voltage synchronous motors mainly assistance air compressors and mine ball mill products. use. We adhere to the provider tenet of “emphasis on merchandise, services with heart” and provide higher-good quality motor merchandise to customers.

Why select us (our service benefit)
1. Specialist motor manufacturing service company
two. Seem solution high quality administration and certification method
three. Have a professional income and complex provider staff
4. The motor has best method and robust mechanical processing capacity
five. Large standard merchandise technological support system
six, great faith and mutual benefit, very good credit history assure.

 

Tdmk Series High-Voltage Mine Ball Mill Synchronous Motor